top of page
Search

Saxtead Green Post Mill - Lifting the buck

twcmtim
Oct 28
2 min read

Saxtead Green Post Mill - Arial shot of the buck being lifted - Photo Credit Alasdair Massie
Saxtead Green Post Mill - Arial shot of the buck being lifted - Photo Credit Alasdair Massie

It seems we've been so exceptionally busy we haven't found the time to write blogs or update the website, something we say every winter we will get better at!

However this felt too important to not find a few minutes to write about.


In June 2026 Nathan Sullivan found fragments of wood in the roundhouse, after some investigation it was found that there were serious issues with the main post. It had not only burst out two of its mortises, but had cracked 2/3rds of the way through like a carrot.


Works started within weeks to remove the fly and sails to reduce the weight and stress on the mill, and secure the buck. If this hadn't been achieved, there was a serious risk the mill could have toppled over. Then proceeded much careful deliberation, expertise and planning to organise the removal of the buck, a completely new challenge for even the most experienced Millwright.


A special bespoke lifting beam was designed and fabricated, this was fitted through the windows in the buck, allowing it to be lifted off in it's entirety. The buck was lifted off on the 1st October.

It was a delicate operation, which required 2 cranes. The larger 150t crane took the weight of the buck, allowing the smaller 60t crane to remove the steps and carriage from the mill.


The stairs and carriage are removed by crane
The stairs and carriage are removed by crane


Once these were removed from the area, the buck could then be lifted up and over the central post, which goes 3 metres above the roundhouse.


Tim Whiting inside the buck during the lift, monitoring the buck and ensuring a clean lift over the samson head.
Tim Whiting inside the buck during the lift, monitoring the buck and ensuring a clean lift over the samson head.
Daniel Cheetham ensuring the buck lifts cleanly off the post during the lift
Daniel Cheetham ensuring the buck lifts cleanly off the post during the lift
The buck clearing the central post. Photo Credit Alasdair Massie
The buck clearing the central post. Photo Credit Alasdair Massie
The buck in mid lift as it almost clears the post which is 3 metres above the roundhouse
The buck in mid lift as it almost clears the post which is 3 metres above the roundhouse

The buck now sits on specialised trestles next to the roundhouse. We are in talks with English Heritage as to the next stages of the project, and the options for the post.


The buck placed on bespoke trestles after the lift
The buck placed on bespoke trestles after the lift

A big thanks goes to R&P Metalworks, NFM Engineering, Wavetrade Ltd, The Morton Partnership, Daniel Connal Partnership, English Heritage and all of the Suffolk Millwright team for the hours spent on ensuring the future of the Saxtead Post Mill for years to come and for the Sullivan family.

 
 
 

Comments


bottom of page